SANITRON ULTRAVIOLET WATER PURIFIERS and WATER SANITIZERS

120 GPH to 25,000 GPH
Sanitron UV / Ultraviolet water purifiers and sanitizers. Water purification with UV
scroll down or click to view an article listed below:

Advantages of the Sanitron
Principle of Operation
Installation & Maintenance
Commercial & Industrial Systems
Specifications of Sanitron Models
Special Features

All units listed below are for 120v 60Hz operation. Contact us directly for SANITRON 220v 50Hz or 12v DC operations
Model #	GPM	GPH	Total	Order Here
S14 A	2	120	$835.00
S17 A	3	180	$875.00
S23 A	6	360	$975.00
S37 C	12	720	$1095.00
S50 C	20	1200	$1335.00
S 2400 C	40	2400	$2,875.00
S 5000 C	83	5000	$5,720.00
S 10,000 C	166	10,000	$11,500.00	Contact us directly for Ordering of the larger units S 10,000 C thru S 25,000 C
S 15,000 C	250	15,000	$17,250.00
S 20,000 C	333	20,000	$23,000.00
S 25,000 C	416	25,000	$28,750.00

FREE Ground Shipping offered with your purchase (within the Continental US)

Sanitron Ultraviolet Purifiers utilize germicidal ultraviolet lamps that produce short wave radiation lethal to bacteria, viruses and other microorganisms present in water.
Economical and safe, Sanitron Ultraviolet Purifiers offer rapid water treatment without the use of heat or dangerous chemicals - often for the lowest cost available by any means.
An ever-growing range of industries and consumer applications have found ultraviolet to be the ideal solution for their water treatment requirements.

Advantages of the Sanitron Water Purification Method

Effective - Virtually all microorganisms are susceptible to Sanitron disinfection.
Economical - Hundreds of gallons can be purified for each penny of operating cost.
Safe - No danger of overdosing, no addition of dangerous chemicals.
Fast - Water is ready for use as soon as it leaves the purifier - no further contact time required.
Easy - Simple installation and maintenance. Compact units require minimum space.
Automatic - Continuous or intermittent disinfection without special attention or measurement.
Chemical Free - No chlorine taste or corrosion problems.
Versatile - Capacities available from two to thousands of gallons per minute (g.p.m.).

Principle of Operation for the Sanitron Water Purifiers

	1.	The water enters the purifier and flows into the annular space between the quartz sleeve and the outside chamber wall.
	2.	The wiper segments induce turbulence in the flowing liquid to assure uniform exposure of suspended micro-organisms to the lethal ultraviolet rays.

3.	Translucent sight port provides positive indication of germicidal lamp operation.
4.	The wiper assembly facilitates periodic cleaning of the quartz sleeve without any disassembly or interruption of purifier operation.
5.	Water leaving the purifier is instantly ready for use.

Installation and Maintenance for the Sanitron Water Purifier

The purifier is installed as close as possible to the point of use. Connection of the inlet and outlet to the water supply and the plug into an ordinary electrical outlet is all that is required. Ordinary maintenance consists of cleaning the quartz sleeve with the manual wiper once monthly or more frequently where conditions dictate. Lamp replacement is recommended every 10,000 hours of operation (approximately 14 months of continuous service).

Click Here to View the Recommended SANITRON Installation

Commercial and Industrial Sanitron Water Purification Units
Sanitron systems of 5,000 g.p.h. and higher utilize interchangeable single lamp chambers. This modular configuration offers advantages found only in Sanitron high capacity systems.	Model S15,000B (15,000 g.p.h.)
Flexibility System components are readily reconfigured to meet changing flow and process requirements.
Independent Monitoring Single lamp chamber design enables separate output monitoring of each ultraviolet lamp.
Standby Capacity Reserve chambers permit shutdown or replacement of individual components without interruption of service.

Model	G.P.M.	G.P.H.	Inlet & Outlet Size⁶	Replacement Lamp	Power Consump⁷	Unit Dimension (inches)			Shipping Data
Model	G.P.M.	G.P.H.	Inlet & Outlet Size⁶	Replacement Lamp	Power Consump⁷	Length	Width	Height	Gross Wt.(lbs.)	Net Wt.(lbs.)
S14	2	120	1/2” NPT	051400	14 Watts	16-3/8	5-7/16	8-3/16	11	7
S17	3	180	3/4” NPT	051098	18 Watts	19-3/8	5-7/16	8-3/16	11	8
S23	6	360	3/4” NPT	051097	24 Watts	25-1/2	5-7/16	8-3/16	14	11
S37B	12	720	1” NPT	051343	44 Watts	39-1/2	5-7/16	9-1/2	30	20
S50B	20	1200	1-1/2” NPT	051334	54 Watts	50-1/2	5-7/16	9-1/2	36	29
S2400B	40	2400	2” NPT	051311	140 Watts	52-1/4	6-7/8	11-1/2	49	36
S5,000B¹	83	5000	2” NPT	051311 (2 lamps)	280 Watts	52-1/4	17-1/4	15	116	85
S10,000B²	166	10000	2” NPT	051311 (4 lamps)	560 Watts	52-1/4	21	34-3/4	267	188
S15,000B³	250	15000	2” NPT	051311 (6 lamps)	840 Watts	52-1/4	21	53-17/64	400	263
S20,000B⁴	333	20000	2” NPT	051311 (8 lamps)	1120 Watts	52-1/4	21	71- 49/64	534	396
S25,000B⁵	416	25000	2” NPT	051311 (10 lamps)	1400 Watts	52-1/4	21	90-17/64	670	520


1.	Two S2400B’s connected in series, 1 inlet and 1 outlet.	•	Maximum recommended operating pressure for all purifiers is 100 p.s.i.
2.	Two S5,000B’s connected in parallel, 2 inlets and 2 outlets.	•	Pressure drop at maximum recommended flow rate is less than 5 p.s.i.
3.	Three S5,000B’s connected in parallel, 3 inlets and 3 outlets.	•	120 Volt 60 Hz and 220 Volt 50 Hz units are standard.
4.	Four S5,000B’s connected in parallel, 4 inlets and 4 outlets.	•	12 and 24 Volt DC units also available.
5.	Five S5,000B’s connected in parallel, 5 inlets and 5 outlets.	•	Sanitron is available for operation on public power supplied throughout the world.
6.	All inlets and outlets are male pipe threads.	•	Consult factory with specific power requirements.
7.	Total power consumption including ballast loss.


Sanitron Water Purifier Special Features
1 - Stainless Steel Construction Chamber, head and clamp are electropolished and passivated stainless steel for an attractive finish and dependable service. 2 - Quick Lamp Change Exclusive Easy-Off Retainer Cap enables effortless lamp replacement without shut down of water pressure or drainage of tank. No tools required. 3 - Patented Dual Action Wiper Mechanism Facilitates periodic cleaning of quartz sleeve without interruption of purifier operation. No disassembly required. Complies with U.S. Public Health Guidelines.
4 - Drain Plug Convenient, in-place drainage of purifier chamber. 5 - Wiper Lock Locks wiper mechanism in retracted position. 6 - Removable Flanged Head Units disassemble completely and easily in the event that repairs are necessary. No special tools or fixtures required. 7 - Sight Port Plug Visible glow provides positive indication of germicidal lamp operation. (Unit shown with optional Guardian Ultraviolet Monitor in sight port). (NOTE: FUSED QUARTZ SLEEVE - Insures optimum lamp output at normal potable water temperatures. See additional Optional Accessories by clicking on link on the top of this page)

Special Options
Protective Coating - for seawater & corrosive environments.
Sanitary & Custom Fittings - for system compatibility.
Special Configurations - for TOC and ozone reduction.
Consult factory for more information or with custom requirements.

[ MINIPURE ] [ MIGHTYPURE ] [ SANITRON ] [ Germicidal Info ]

[ SANITRON Install ] [ Parts & Accessories ]

Email: info@purestfilters.com

Sales Hours:	Monday - Friday 8:30AM to 4:30PM EST
Service and Repair:	Monday - Friday 8:30AM to 4:30PM EST