Purest Filters - Well Water Treatment Systems - Whole House Water Purifiers & Filters -
Point-of-Entry & Point-of-Use Water Systems - Specialty & Custom Water Treatment Solutions - Over 20 YEARS of Sales & Service
FREE GROUND SHIPPING** on orders in the Continental U.S.
**Free Ground Shipping in Continental U.S.
for all items under 80 lbs. at shipping weight.
Those items above 80 lbs.
require additional shipping costs. Those items are clearly marked.
Reverse Osmosis Whole House Water Filters, Filtration and RO Water Purifier Systems
Home & Commercial use Whole House & High Volume RO Water Treatment Systems
- You can enjoy clean, safe and healthy filtered drinking water ANYWHERE with our Reverse Osmosis Water Filters!
Reverse Osmosis water filtering is the preferred filtering technology for
highly contaminated well water, ground water sources, brackish and salt water.
Reverse Osmosis will filter these water sources into safe, clean and healthy
water for use throughout your home.
Reverse Osmosis water filtration and water treatment - Producing fresh and
healthy drinking water from all types of water sources, including salt water,
brackish water, heavily contaminated surface water, highly contaminated well water and more...
ALL our Reverse Osmosis Filter Systems are BPA FREE!
Reverse Osmosis Water Filtering effectively removes the
following from your water:
Ultra-Filtration of public water supplies Exceptional filtration of well water & ground water Filtration of stored water systems Desalination of brackish water and salt water for general fresh water use Filtration of salt water and/or brackish water for safe and healthy drinking water Easily add a UV Sanitizer to provide the healthiest bacteria,
virus and microorganism free water available
SCROLL DOWN TO VIEW ALL
If your source water is highly contaminated, and your water treatment requirements require high quality water
with a minimum of chemical manipulation then a Reverse Osmosis filtering system may be just what you
need for clean, healthy drinking water, in some of the harshest of conditions.
Reverse Osmosis is a process for removing dissolved mineral
salts, organic molecules and many other impurities by forcing water under
pressure to pass through a multi process filtration system with semi-permeable membranes.
Since Reverse Osmosis does not occur naturally, it must be
created by applying pressure to the water in order to force it
through the membrane to remove the solids from the water. With pressures from 200 to 400 psig in most applications or even
up to 1,200 psig for sea water desalination and high solids conditions. Click here to learn more about how Reverse Osmosis Filtration works
We also offer
below counter,
whole house (featured below) and high capacity commercial use Reverse Osmosis water filters and RO water
purification and filtering systems (also featured below).
Our
Purest Filters
brand of whole house RO
water treatment systems treat from 150 gallons per day to over 800 gallons per day for
well water, brackish, salt water, and highly contaminated water treatment - we have your Reverse Osmosis water filtering solution.
The following
Purest Filters
RO water treatment systems are Made in the USA
Any of our Reverse Osmosis water treatment systems can have an
Ultraviolet / UV Water Sanitizer added to the water
filtering system, for the ultimate assurance of clean and healthy sanitized water.
The addition of UV disinfection assures the removal of 99.99% of all
micro-organisms (viruses, bacteria, mold, etc.) from your drinking water (
Click HERE to view list of Microorganisms disinfected by UV).
For any Reverse Osmosis water filter system that does not
include an integrated UV water purifier, you can always add any of our
170+ UV Water Purifiers currently
offered as an additional water treatment component for the added assurance of
the healthiest of clean, pure and sanitized water in your home, office, or business.
We offer suggested UV water sanitizer units below for all of our whole house RO
water treatment systems.
FREE Ground Shipping** is offered for many orders
shipped inside the Continental USA.
We often ship our water filter systems worldwide.
We have also custom designed water filter systems that are currently in use in some of the
most remote regions of the the world, including the Caribbean, South America, Africa,
Afghanistan, the Middle East and more. Please contact us directly and we'll be happy
to discuss designing an affordable and efficient custom water filtration and
treatment system for your specific requirements. Contact us directly for information and pricing -
DIRECT PHONE 1-561-660-3250.
From remote homes, Caribbean Island resorts and homes, to remote towns and villages
in South America, Africa and the Middle East, Purest Filters
has been providing the best and most
efficient in water filtration and water treatment systems in the U.S. and beyond since 1997.
We are ALWAYS happy to help you in your selection
and answer any questions you may have regarding your own particular water
filtering issues - Feel free to call us DIRECT PHONE. You will not speak with a
salesperson or customer service rep, you will speak directly with the water
treatment specialist at Purest Filters -
TOLL FREE:
1.800.738.1750
or DIRECT 561.660.3250
SCROLL DOWN TO VIEW ALL & ORDER
FREE GROUND SHIPPING** for all orders within the Continental U.S.
For orders outside the Continental USA -
Contact us directly for additional SHIPPING CHARGES
Custom designed RO water filtering systems with optional world wide
shipping - We regularly design, build and ship our home and commercial use
Reverse Osmosis Water Filtering Systems outside of the U.S. - South America,
Africa, The Middle East and all over the World - Contact us directly if you have
questions or require shipping outside of the Continental U.S.
Reverse Osmosis - The Purest Filters Series of Whole House RO Water Treatment Systems
Years of experience, research have produced
some of the most effective
Reverse Osmosis systems in today's market. our
Purest Filters Reverse
Osmosis systems are available with multiple stages of water filtering -
Reverse Osmosis is often the well water, brackish water and many more challenging water filtration
solution for fresh, clean, healthy drinking water, and whole house use water.
SCROLL DOWN the page to view all 12 RO units.
FREE Ground SHIPPING** on these RO systems in the Continental U.S.
PUREST FILTERS COMPACT RO WHOLE HOUSE WATER FILTER SYSTEM
Click on photo above of the
Purest Filters COMPACT
Whole House RO water treatment system to view as larger image
PUREST FILTERS
Whole House COMPACT RO Water Treatment System Specifications & Features:
STANDARD FEATURES
Available in 150, 250, 450 and 800 GPD (gallons per day) systems
High efficiency membrane
ALL SYSTEMS DESIGNED TO TREAT TDS under 2000ppm and higher TDS from 2000 to
5000ppm
Stainless steel membrane vessel
Powder-coated steel frame
Liquid-filled system pressure gauge
Inlet/Outlet pre-filter gauges
Fixed waste and recycle flow controls, s.s.
Storage tank pressure switch
Feed water inlet solenoid valve
Feed water low pressure switch
Rotary vane pump
10″ 5 micron sediment pre-filter (1)
10″ Carbon block pre-filters (2)
Optional
COMPACT RO Water Treatment Systems Features:
Float switch for open tank application - $175.00
Product/Waste flow meters, remote mount - $175.00
External inline dual TDS monitor - $125.00
Nanofiltration membrane (Removes 98% hardness, up to 85% TDS, high
recovery rate) - $???
Optional wall mount design (see model COMWM - Featured Below)
220V / 60HZ or 220V / 50HZ
Specifications
PUREST FILTERS
Whole House COMPACT RO Water Treatment Systems:
MODEL #
^GPD
MEMBRANE
SIZE
MEMBRANE
TYPE
HP
110v
60hz amps
220v 60hz -
1ph amps
RECOVERY
RATE
(fixed)
PIPING
DIMENSIONS
weight lbs.
Base Price
ORDER / ADD TO CART
inlet
waste
prod
COM150
150
2.5"x14"
HP
1/2 hp
7.2
3.6
50-60%
1/2"
FPT
3/8"
FPT
3/8"
FPT
21"x16"x18"H
53 lbs.
150 GPD
$2,305.00
COM250
250
2.5"x14"
HP
1/2 hp
7.2
3.6
50-60%
1/2"
FPT
3/8"
FPT
3/8"
FPT
26"x16"x18"H
55 lbs
250 GPD
$2,325.00
COM450
450
4"x14"
HP
1/2 hp
7.2
3.6
50-60%
1/2"
FPT
3/8"
FPT
3/8"
FPT
21"x16"x18"H
58 lbs.
450 GPD
$2,425.00
COM800
800
4"x21"
HP
3/4 hp
10.4
5.2
50-60%
1/2"
FPT
3/8"
FPT
3/8"
FPT
26"x16"x18"H
63 lbs
800 GPD
$2,695.00
FEED WATER PARAMETERS:
>Temperature 85 degree F maximum >Pressure 40 - 80 psi maximum >TDS up to
2,000ppm, extended to 2,000-5,000ppm for HP model.
>Iron tolerance 0.5 ppm maximum >Hydrogen sulfide must be removed >Silica
tolerance can not be higher than 100 ppm in the concentrate stream. Antiscalant
should be considered for any levels over 75 ppm. >Turbidity should be removed
>Hardness over 10gpg should be softened.
OPERATING PARAMETERS:
>Operating pressure range from 150200 psi maximum >Water recovery is factory
set at 5060% >pH range 3-11 >Flow rates are determined by the membrane mfgrs.
testing criteria of 1500 ppm Nacl solution, 77 degree F water temperature.
Typical membrane salt rejection is 95-99%. *Actual flow rates may vary depending
on the pre-treatment used, water conditions, system size, membrane array and
applied pressure.
PUREST FILTERS COMPACT WALL MOUNT RO WHOLE HOUSE WATER FILTER SYSTEM
Click on photo above of the
Purest Filters COMPACT Wall Mount
Whole House RO water treatment system to view as larger image
PUREST FILTERS
Whole House COMPACT WALL MOUNT RO Water Treatment System Specifications &
Features:
STANDARD FEATURES
Available in 150, 250, 450 and 800 GPD (gallons per day) systems
High efficiency membrane
ALL SYSTEMS DESIGNED TO TREAT TDS under 2000ppm and higher TDS from 2000 to
5000ppm
Stainless steel membrane vessel
Powder-coated steel frame
Liquid-filled system pressure gauge
Inlet/Outlet pre-filter gauges
Fixed waste and recycle flow controls, s.s.
Storage tank pressure switch
Feed water inlet solenoid valve
Feed water low pressure switch
Rotary vane pump
10″ 5 micron sediment pre-filter (1)
10″ Carbon block pre-filters (2)
Optional
COMPACT WALL MOUNT RO Water Treatment Systems Features:
Float switch for open tank application - $175.00
Product/Waste flow meters, remote mount - $175.00
External inline dual TDS monitor - $125.00
Nanofiltration membrane (Removes 98% hardness, up to 85% TDS, high
recovery rate) - $???
220V / 60HZ or 220V / 50HZ
Specifications
Whole House COMPACT WALL MOUNT RO Water Treatment Systems:
MODEL #
^GPD
MEMBRANE
SIZE
MEMBRANE
TYPE
HP
110v
60hz amps
220v 60hz -
1ph amps
RECOVERY
RATE
(fixed)
PIPING
DIMENSIONS
weight lbs.
Base Price
ORDER / ADD TO CART
inlet
waste
prod
COMWM150
150
2.5"x14"
HP
1/2 hp
7.2
3.6
50-60%
1/2"
FPT
3/8"
FPT
3/8"
FPT
30"x7"x20"H
53 lbs.
150 GPD
$2,305.00
COMWM250
250
2.5"x14"
HP
1/2 hp
7.2
3.6
50-60%
1/2"
FPT
3/8"
FPT
3/8"
FPT
30"x7"x20"H
55 lbs
250 GPD
$2,325.00
COMWM450
450
4"x14"
HP
1/2 hp
7.2
3.6
50-60%
1/2"
FPT
3/8"
FPT
3/8"
FPT
30"x7x20"H
58 lbs.
450 GPD
$2,425.00
COMWM800
800
4"x21"
HP
3/4 hp
10.4
5.2
50-60%
1/2"
FPT
3/8"
FPT
3/8"
FPT
30"x7"x20"H
68 lbs
800 GPD
$2,695.00
FEED WATER PARAMETERS:
>Temperature 85 degree F maximum >Pressure 40 - 80 psi maximum >TDS up to
2,000ppm, extended to 2,000-5,000ppm for HP model.
>Iron tolerance 0.5 ppm maximum >Hydrogen sulfide must be removed >Silica
tolerance can not be higher than 100 ppm in the concentrate stream. Antiscalant
should be considered for any levels over 75 ppm. >Turbidity should be removed
>Hardness over 10gpg should be softened.
OPERATING PARAMETERS:
>Operating pressure range from 150200 psi maximum >Water recovery is factory
set at 5060% >pH range 3-11 >Flow rates are determined by the membrane mfgrs.
testing criteria of 1500 ppm Nacl solution, 77 degree F water temperature.
Typical membrane salt rejection is 95-99%. *Actual flow rates may vary depending
on the pre-treatment used, water conditions, system size, membrane array and
applied pressure.
PUREST FILTERS COMPACT II RO WHOLE HOUSE WATER FILTER SYSTEM
Click on photo above of the
Purest Filters COMPACT II
Whole House RO water treatment system
to view as larger image
PUREST FILTERS
Whole House COMPACT II RO Water Treatment System Specifications &
Features:
STANDARD FEATURES
Available in 150, 250, 450 and 800 GPD (gallons per day) systems
High efficiency membrane
ALL SYSTEMS DESIGNED TO TREAT TDS under 2000ppm and higher TDS from 2000 to
5000ppm
Stainless steel membrane vessel
Powder-coated steel frame
Liquid-filled system pressure gauge
Inlet/Outlet pre-filter gauges
Fixed waste and recycle flow controls, s.s.
Storage tank pressure switch
Feed water inlet solenoid valve
Feed water low pressure switch
Rotary vane pump
20″ 5 micron sediment pre-filter (1)
20″ Carbon block pre-filters (2)
Optional
COMPACT II RO Water Treatment Systems Features:
Float switch for open tank application - $175.00
Product/Waste flow meters, remote mount - $175.00
External inline dual TDS monitor - $125.00
Nanofiltration membrane (Removes 98% hardness, up to 85% TDS, high
recovery rate) - $???
220V / 60HZ or 220V / 50HZ
Specifications
Whole House COMPACT II RO Water Treatment Systems:
MODEL #
^GPD
MEMBRANE
SIZE
MEMBRANE
TYPE
HP
110v
60hz amps
220v 60hz -
1ph amps
RECOVERY
RATE
(fixed)
PIPING
DIMENSIONS
weight lbs.
Base Price
ORDER / ADD TO CART
inlet
waste
prod
COM-II-150
150
2.5"x14"
HP
1/2 hp
7.2
3.6
50-60%
1/2"
FPT
3/8"
FPT
3/8"
FPT
14"x16"x30"H
61 lbs.
150 GPD
$2,655.00
COM-II-250
250
2.5"x14"
HP
1/2 hp
7.2
3.6
50-60%
1/2"
FPT
3/8"
FPT
3/8"
FPT
14"x16"x30"H
63 lbs
250 GPD
$2,680.00
COM-II-450
450
4"x14"
HP
1/2 hp
7.2
3.6
50-60%
1/2"
FPT
3/8"
FPT
3/8"
FPT
14"x16x30"H
66 lbs.
450 GPD
$2,785.00
COM-II-800
800
4"x21"
HP
3/4 hp
10.4
5.2
50-60%
1/2"
FPT
3/8"
FPT
3/8"
FPT
14"x16"x30"H
71 lbs
800 GPD
$3,070.00
FEED WATER PARAMETERS:
>Temperature 85 degree F maximum >Pressure 40 - 80 psi maximum >TDS up to
2,000ppm, extended to 2,000-5,000ppm for HP model.
>Iron tolerance 0.5 ppm maximum >Hydrogen sulfide must be removed >Silica
tolerance can not be higher than 100 ppm in the concentrate stream. Antiscalant
should be considered for any levels over 75 ppm. >Turbidity should be removed
>Hardness over 10gpg should be softened.
OPERATING PARAMETERS:
>Operating pressure range from 150200 psi maximum >Water recovery is factory
set at 5060% >pH range 3-11 >Flow rates are determined by the membrane mfgrs.
testing criteria of 1500 ppm Nacl solution, 77 degree F water temperature.
Typical membrane salt rejection is 95-99%. *Actual flow rates may vary depending
on the pre-treatment used, water conditions, system size, membrane array and
applied pressure.
Purest Filters - Mailing
Address: 10159 41st Terrace Suite #217 Boynton Beach, FL
33436
TOLL FREE: 1-800-738-1750
DIRECT PHONE:
561-660-3250
**Free Ground Shipping in
Continental U.S. for all items under 80 lbs at shipping weight.
Those items above 80 lbs require additional shipping costs. Those
items are clearly marked.
*Price Match
Guarantee does
not include auction and bidding style competitors and web sites, or
competitors that are selling factory refurbished or not new in the
box items.
As we offer FREE Ground Shipping on most items - Price Match
Guarantee will match competitors price plus any shipping charges
they may apply to the item we are matching.
Price Match Guarantee is valid for day of sale only.
Lowest
Price Guarantee is only applicable to any item priced at $299.00 or
above.